One of The Oldest manufacturers, suppliers & exporter of Stainless Steel Fittings & Flanges, Alloy Steel Fittings & Flanges, Carbon Steel Fittings & Flanges Since 1987.

Pipe End Cap Manufacturer in India

Request a Call Back


Pipe End Cap Manufacturer And Suppliers Mumbai, India, UAE

Table Of Content

Pipe End Cap Manufacturer in Mumbai

Pipe end cap manufacturer in mumbai at a great price due to reasonable man-hours in India and complete source of high-quality pipe end cap at the best price available in Mumbai, India. Fitwel Industries LLP is one of the leading Manufacturers, Supplier and Exporters of High quality ASME/ANSI B16.9 Pipe End Caps in Mumbai, India, UAE. They are used in the plumbing apparatus of domestic, commercial and industrial water supply lines, machinery and processing equipment etc.

These Stainless Steel Pipe End Caps are available in different specification, grades, shapes & thickness as per the clients requirments. We are involved in providing a wide range of Pipe End Cap Fittings that is manufactured using high quality of raw material by means of industry norms. The main purpose of using pipe End Caps is to waterproof the connections. They are also used to close the ends of hydraulic or pneumatic pipes and tubes. So the function of an end cap is to block off the end of a line a piping system. This is achieved by placing the end cap over the open line and welding around the point. Premium quality raw materials are used to craft these caps and stub ends which add strength and durability to these products. In addition, offered fittings can be custom-made as per precise requirements of our clienteles.

Pipe End Cap Manufacturer in India

These Pipe End Cap Manufacturer in India is a fantastic material, which is difficult to work with, but so rewarding when it can be pulled off. Our Stainless Steel Pipe End Cap is high–strength alloy that can be used at cryogenic temperatures up to about 800 Degree F (427 Degree C). Often referred to as the “workhorse” grade, these Carbon Steel Pipe End Cap is most commonly found in the annealed condition. We offer processing services and a fully automated magazine feed rod blanking line for these Pipe End Cap, where we can process your material to your exact requirements. End Cap manufacturer in india has excellent corrosion resistance in oxidizing conditions and is effectively immune from stress corrosion cracking, pitting corrosion and crevice corrosion in chloride solutions below 70 Degree C. These Pipe End Cap is the most formable and corrosion-resistant amongst the pure grades of SS is biocompatible and also has excellent tri-biological properties.

What is Pipe End Caps?

Pipe End caps or stop ends are commonly used in pipe work to dead end the flow of gas or water. We stock a variety of different types, which are connected slightly differently to one another. Depending on the existing pipe work, you can choose from either brass, copper or plastic in a range if different diameters.

ASME B16.9 Pipe End Caps NPS 1/2 - 48 Dimension

pipe end cap
NPS O.D.
D
LENGTH
H
LENGTH
H1
1/2 21.3 25 25
3/4 26.7 25 25
1 33.4 38 38
42.2 38 38
48.3 38 38
2 60.3 38 44
73 38 51
3 88.9 51 64
101.6 64 76
4 114.3 64 76
5 141.3 76 89
6 168.3 89 102
8 219.1 102 127
10 273 127 152
12 323.8 152 178
14 355.6 165 191
16 406.4 178 203

ASME B16.9 Pipe End Caps Dimension Tolerances

Nominal Pipe Size 1/2 to 2½ 3 to 3½ 4 5 to 8
Outside Diameter
at Bevel (D)
+ 1.6
- 0.8
1.6 1.6 + 2.4
- 1.6
Inside Diameter at End 0.8 1.6 1.6 1.6
Overall Length (H) 3 3 3 6
Nominal Pipe Size 10 to 18 20 to 24 26 to 30 32 to 48
Outside Diameter
at Bevel (D)
+ 4
- 3.2
+ 6.4
- 4.8
+ 6.4
- 4.8
+ 6.4
- 4.8
Inside Diameter at End 3.2 4.8 + 6.4
- 4.8
+ 6.4
- 4.8
Overall Length (H) 6 6 10 10
Wall Thickness (t) Not less than 87.5% of Nominal Wall Thickness

Dimensional tolerances are in millimeters unless otherwise indicated and are equal & except as noted.

ASME B16.9 Pipe End Caps Specification:

Size : 1/2" (15 NB) to 48" (1200NB)

Standards : ASME / ANSI - B 16.9, ASTM A403 - ASME SA403, ASME B16.9, ASME B16.25, ASME B16.28, MSS SP-43.

Thickness : 2-40 mm / SCh4, SCH10, SCh40, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS

Type : Seamless / ERW / Welded / Fabricated

Form : Pipe Caps, End Caps, Pipe End Caps

ASME B16.9 Pipe End Caps Material & Grades :

Stainless Steel Buttweld Pipe End Caps : ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404

Duplex & Super Duplex Steel Buttweld Pipe End Caps : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. UNS S32750, S32950. Werkstoff No. 1.4462

Carbon Steel Buttweld Pipe End Caps : ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.

Alloy Steel Buttweld Pipe End Caps : ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91

Nickel Alloy Buttweld Pipe End Caps : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )


Call-09987994248. Leading pipe end cap manufacture in India. As well as top supplier & exporter of stainless steel pipe end cap & carbon steel pipe end cap material in the protective form of high quality used in drilling and transport of gas/liquids in pipelines and get at the best price in Mumbai, Dubai & UAE, UK, USA.

Other Names: Pipe End Cap, Buttweld End cap, Pipe End Cap Fittings

Material: Stainless Steel, Carbon Steel, Alloy Steel & High Nickel Grade

Brand: Fitwel Industries LLP

Manufacturer: Fitwel Industries LLP

Suppliers & Exporter: Fitwel Industries LLP

Rating: 4.7/5 based on 913 customer reviews

Related Products



Pipe End Cap Manufacturer World Wide

Below, We are having existence in countries below for Pipe End Cap

  • We are the leading manufacturer and supplier of Pipe End Cap in Dubai & Pipe End Cap in UAE/ United Arab Emirates. Get the best offer for high-quality Pipe End Cap from us in Dubai, UAE. We have plenty of stock of Pipe End Cap in the UAE. Place your order online for Pipe End Cap in Dubai, United Arab Emirates. We are the leading Pipe End Cap manufacturer in Dubai and Pipe End Cap manufacturer in UAE. Get your best quality Pipe End Cap in Dubai. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Singapore. Get the best offer for high-quality Pipe End Cap from us in Singapore. We have plenty of stock of Pipe End Cap in the Singapore. Place your order online for Pipe End Cap in Singapore. We are the leading Pipe End Cap manufacturer in Singapore. Get your best quality Pipe End Cap in Singapore. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Oman. Get the best offer for high-quality Pipe End Cap from us in Oman. We have plenty of stock of Pipe End Cap in the Oman. Place your order online for Pipe End Cap in Oman. We are the leading Pipe End Cap manufacturer in Oman. Get your best quality Pipe End Cap in Oman. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Italy. Get the best offer for high-quality Pipe End Cap from us in Italy. We have plenty of stock of Pipe End Cap in the Italy. Place your order online for Pipe End Cap in Italy. We are the leading Pipe End Cap manufacturer in Italy. Get your best quality Pipe End Cap in Italy. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Qatar. Get the best offer for high-quality Pipe End Cap from us in Qatar. We have plenty of stock of Pipe End Cap in the Qatar. Place your order online for Pipe End Cap in Qatar. We are the leading Pipe End Cap manufacturer in Qatar. Get your best quality Pipe End Cap in Qatar. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Australia. Get the best offer for high-quality Pipe End Cap from us in Australia. We have plenty of stock of Pipe End Cap in the Australia. Place your order online for Pipe End Cap in Australia. We are the leading Pipe End Cap manufacturer in Australia. Get your best quality Pipe End Cap in Australia. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in New Zealand. Get the best offer for high-quality Pipe End Cap from us in New Zealand. We have plenty of stock of Pipe End Cap in the New Zealand. Place your order online for Pipe End Cap in New Zealand. We are the leading Pipe End Cap manufacturer in New Zealand. Get your best quality Pipe End Cap in New Zealand. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Saudi Arabia. Get the best offer for high-quality Pipe End Cap from us in Saudi Arabia. We have plenty of stock of Pipe End Cap in the Saudi Arabia. Place your order online for Pipe End Cap in Saudi Arabia. We are the leading Pipe End Cap manufacturer in Saudi Arabia. Get your best quality Pipe End Cap in Saudi Arabia. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Bahrain. Get the best offer for high-quality Pipe End Cap from us in Bahrain. We have plenty of stock of Pipe End Cap in the Bahrain. Place your order online for Pipe End Cap in Bahrain. We are the leading Pipe End Cap manufacturer in Bahrain. Get your best quality Pipe End Cap in Bahrain. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in UK. Get the best offer for high-quality Pipe End Cap from us in UK. We have plenty of stock of Pipe End Cap in the UK. Place your order online for Pipe End Cap in UK. We are the leading Pipe End Cap manufacturer in UK. Get your best quality Pipe End Cap in UK. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Austria. Get the best offer for high-quality Pipe End Cap from us in Austria. We have plenty of stock of Pipe End Cap in the Austria. Place your order online for Pipe End Cap in Austria. We are the leading Pipe End Cap manufacturer in Austria. Get your best quality Pipe End Cap in Austria. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Nigeria. Get the best offer for high-quality Pipe End Cap from us in Nigeria. We have plenty of stock of Pipe End Cap in the Nigeria. Place your order online for Pipe End Cap in Nigeria. We are the leading Pipe End Cap manufacturer in Nigeria. Get your best quality Pipe End Cap in Nigeria. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Sudan. Get the best offer for high-quality Pipe End Cap from us in Sudan. We have plenty of stock of Pipe End Cap in the Sudan. Place your order online for Pipe End Cap in Sudan. We are the leading Pipe End Cap manufacturer in Sudan. Get your best quality Pipe End Cap in Sudan. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Egypt. Get the best offer for high-quality Pipe End Cap from us in Egypt. We have plenty of stock of Pipe End Cap in the Egypt. Place your order online for Pipe End Cap in Egypt. We are the leading Pipe End Cap manufacturer in Egypt. Get your best quality Pipe End Cap in Egypt. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Zambia. Get the best offer for high-quality Pipe End Cap from us in Zambia. We have plenty of stock of Pipe End Cap in the Zambia. Place your order online for Pipe End Cap in Zambia. We are the leading Pipe End Cap manufacturer in Zambia. Get your best quality Pipe End Cap in Zambia. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Libya. Get the best offer for high-quality Pipe End Cap from us in Libya. We have plenty of stock of Pipe End Cap in the Libya. Place your order online for Pipe End Cap in Libya. We are the leading Pipe End Cap manufacturer in Libya. Get your best quality Pipe End Cap in Libya. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Brazil. Get the best offer for high-quality Pipe End Cap from us in Brazil. We have plenty of stock of Pipe End Cap in the Brazil. Place your order online for Pipe End Cap in Brazil. We are the leading Pipe End Cap manufacturer in Brazil. Get your best quality Pipe End Cap in Brazil. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Chile. Get the best offer for high-quality Pipe End Cap from us in Chile. We have plenty of stock of Pipe End Cap in the Chile. Place your order online for Pipe End Cap in Chile. We are the leading Pipe End Cap manufacturer in Chile. Get your best quality Pipe End Cap in Chile. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in USA. Get the best offer for high-quality Pipe End Cap from us in USA. We have plenty of stock of Pipe End Cap in the USA. Place your order online for Pipe End Cap in USA. We are the leading Pipe End Cap manufacturer in USA. Get your best quality Pipe End Cap in USA. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Mexico. Get the best offer for high-quality Pipe End Cap from us in Mexico. We have plenty of stock of Pipe End Cap in the Mexico. Place your order online for Pipe End Cap in Mexico. We are the leading Pipe End Cap manufacturer in Mexico. Get your best quality Pipe End Cap in Mexico. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Denmark. Get the best offer for high-quality Pipe End Cap from us in Denmark. We have plenty of stock of Pipe End Cap in the Denmark. Place your order online for Pipe End Cap in Denmark. We are the leading Pipe End Cap manufacturer in Denmark. Get your best quality Pipe End Cap in Denmark. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Ukraine. Get the best offer for high-quality Pipe End Cap from us in Ukraine. We have plenty of stock of Pipe End Cap in the Ukraine. Place your order online for Pipe End Cap in Ukraine. We are the leading Pipe End Cap manufacturer in Ukraine. Get your best quality Pipe End Cap in Ukraine. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Peru. Get the best offer for high-quality Pipe End Cap from us in Peru. We have plenty of stock of Pipe End Cap in the Peru. Place your order online for Pipe End Cap in Peru. We are the leading Pipe End Cap manufacturer in Peru. Get your best quality Pipe End Cap in Peru. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Lebanon. Get the best offer for high-quality Pipe End Cap from us in Lebanon. We have plenty of stock of Pipe End Cap in the Lebanon. Place your order online for Pipe End Cap in Lebanon. We are the leading Pipe End Cap manufacturer in Lebanon. Get your best quality Pipe End Cap in Lebanon. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Russia. Get the best offer for high-quality Pipe End Cap from us in Russia. We have plenty of stock of Pipe End Cap in the Russia. Place your order online for Pipe End Cap in Russia. We are the leading Pipe End Cap manufacturer in Russia. Get your best quality Pipe End Cap in Russia. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in France. Get the best offer for high-quality Pipe End Cap from us in France. We have plenty of stock of Pipe End Cap in the France. Place your order online for Pipe End Cap in France. We are the leading Pipe End Cap manufacturer in France. Get your best quality Pipe End Cap in France. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Hungary. Get the best offer for high-quality Pipe End Cap from us in Hungary. We have plenty of stock of Pipe End Cap in the Hungary. Place your order online for Pipe End Cap in Hungary. We are the leading Pipe End Cap manufacturer in Hungary. Get your best quality Pipe End Cap in Hungary. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Ethiopia. Get the best offer for high-quality Pipe End Cap from us in Ethiopia. We have plenty of stock of Pipe End Cap in the Ethiopia. Place your order online for Pipe End Cap in Ethiopia. We are the leading Pipe End Cap manufacturer in Ethiopia. Get your best quality Pipe End Cap in Ethiopia. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Uganda. Get the best offer for high-quality Pipe End Cap from us in Uganda. We have plenty of stock of Pipe End Cap in the Uganda. Place your order online for Pipe End Cap in Uganda. We are the leading Pipe End Cap manufacturer in Uganda. Get your best quality Pipe End Cap in Uganda. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Belgium. Get the best offer for high-quality Pipe End Cap from us in Belgium. We have plenty of stock of Pipe End Cap in the Belgium. Place your order online for Pipe End Cap in Belgium. We are the leading Pipe End Cap manufacturer in Belgium. Get your best quality Pipe End Cap in Belgium. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Argentina. Get the best offer for high-quality Pipe End Cap from us in Argentina. We have plenty of stock of Pipe End Cap in the Argentina. Place your order online for Pipe End Cap in Argentina. We are the leading Pipe End Cap manufacturer in Argentina. Get your best quality Pipe End Cap in Argentina. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Ecuador. Get the best offer for high-quality Pipe End Cap from us in Ecuador. We have plenty of stock of Pipe End Cap in the Ecuador. Place your order online for Pipe End Cap in Ecuador. We are the leading Pipe End Cap manufacturer in Ecuador. Get your best quality Pipe End Cap in Ecuador. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Uruguay. Get the best offer for high-quality Pipe End Cap from us in Uruguay. We have plenty of stock of Pipe End Cap in the Uruguay. Place your order online for Pipe End Cap in Uruguay. We are the leading Pipe End Cap manufacturer in Uruguay. Get your best quality Pipe End Cap in Uruguay. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Indonesia. Get the best offer for high-quality Pipe End Cap from us in Indonesia. We have plenty of stock of Pipe End Cap in the Indonesia. Place your order online for Pipe End Cap in Indonesia. We are the leading Pipe End Cap manufacturer in Indonesia. Get your best quality Pipe End Cap in Indonesia. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in SriLanka. Get the best offer for high-quality Pipe End Cap from us in SriLanka. We have plenty of stock of Pipe End Cap in the SriLanka. Place your order online for Pipe End Cap in SriLanka. We are the leading Pipe End Cap manufacturer in SriLanka. Get your best quality Pipe End Cap in SriLanka. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Vietnam. Get the best offer for high-quality Pipe End Cap from us in Vietnam. We have plenty of stock of Pipe End Cap in the Vietnam. Place your order online for Pipe End Cap in Vietnam. We are the leading Pipe End Cap manufacturer in Vietnam. Get your best quality Pipe End Cap in Vietnam. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Kuwait. Get the best offer for high-quality Pipe End Cap from us in Kuwait. We have plenty of stock of Pipe End Cap in the Kuwait. Place your order online for Pipe End Cap in Kuwait. We are the leading Pipe End Cap manufacturer in Kuwait. Get your best quality Pipe End Cap in Kuwait. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Jordan. Get the best offer for high-quality Pipe End Cap from us in Jordan. We have plenty of stock of Pipe End Cap in the Jordan. Place your order online for Pipe End Cap in Jordan. We are the leading Pipe End Cap manufacturer in Jordan. Get your best quality Pipe End Cap in Jordan. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Netherlands. Get the best offer for high-quality Pipe End Cap from us in Netherlands. We have plenty of stock of Pipe End Cap in the Netherlands. Place your order online for Pipe End Cap in Netherlands. We are the leading Pipe End Cap manufacturer in Netherlands. Get your best quality Pipe End Cap in Netherlands. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Greeces. Get the best offer for high-quality Pipe End Cap from us in Greeces. We have plenty of stock of Pipe End Cap in the Greeces. Place your order online for Pipe End Cap in Greeces. We are the leading Pipe End Cap manufacturer in Greeces. Get your best quality Pipe End Cap in Greeces. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Kenyas. Get the best offer for high-quality Pipe End Cap from us in Kenyas. We have plenty of stock of Pipe End Cap in the Kenyas. Place your order online for Pipe End Cap in Kenyas. We are the leading Pipe End Cap manufacturer in Kenyas. Get your best quality Pipe End Cap in Kenyas. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Algerias. Get the best offer for high-quality Pipe End Cap from us in Algerias. We have plenty of stock of Pipe End Cap in the Algerias. Place your order online for Pipe End Cap in Algerias. We are the leading Pipe End Cap manufacturer in Algerias. Get your best quality Pipe End Cap in Algerias. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Cubas. Get the best offer for high-quality Pipe End Cap from us in Cubas. We have plenty of stock of Pipe End Cap in the Cubas. Place your order online for Pipe End Cap in Cubas. We are the leading Pipe End Cap manufacturer in Cubas. Get your best quality Pipe End Cap in Cubas. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Angolas. Get the best offer for high-quality Pipe End Cap from us in Angolas. We have plenty of stock of Pipe End Cap in the Angolas. Place your order online for Pipe End Cap in Angolas. We are the leading Pipe End Cap manufacturer in Angolas. Get your best quality Pipe End Cap in Angolas. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Canada. Get the best offer for high-quality Pipe End Cap from us in Canada. We have plenty of stock of Pipe End Cap in the Canada. Place your order online for Pipe End Cap in Canada. We are the leading Pipe End Cap manufacturer in Canada. Get your best quality Pipe End Cap in Canada. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

  • We are the leading manufacturer and supplier of Pipe End Cap in Namibia. Get the best offer for high-quality Pipe End Cap from us in Namibia. We have plenty of stock of Pipe End Cap in the Namibia. Place your order online for Pipe End Cap in Namibia. We are the leading Pipe End Cap manufacturer in Namibia. Get your best quality Pipe End Cap in Namibia. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
    Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

    Specification of Pipe End Cap

    1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
    2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
    3. Size : Seamless ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
    4. Type : Seamless / Welded / Fabricated
    5. Form : Pipe Cap, End Cap, Pipe End Cap
    6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )