fitwel logo

One of The Oldest manufacturers, suppliers & exporter of Stainless Steel Fittings & Flanges, Alloy Steel Fittings & Flanges, Carbon Steel Fittings & Flanges Since 1987

Blind Flanges Manufacturers in India

Request a Call Back

BLRF Flange & Blind Flanges Manufacturers in Mumbai

PED Approved Blind Flanges Manufacturer & Suppliers

PED Certified Blind Flanges Manufacturer & Suppliers

Fitwel Industries LLP is a manufacturer and supplier of blind flanges in different grades and scales. We manufacture flanges of all types as well. Blind Flanges is used widely in applications where the pipeline has to be terminated. The blind end or the plate of the flange seals the connection so that the flow ends with the blind flange. As a leading blind flange manufacturer, & we supply these flanges in different types of material grade. Our experienced professionals are engaged with us who fabricate these flanges with excellent precision. This is a flange without a bore and is used to shut off a piping system or vessel opening. BLRF Flanges are manufactured without a bore and used to blank off the ends of piping, Valves, and pressure vessel openings.

The main purpose of using a Blind Flanges is to block off a section of pipe or a nozzle on a vessel that has not been used. A nozzle typically is a pipe that comes out of a vessel. Usually, a nozzle is flanged so it could be connected to either valves or piping. Several times, a nozzle will be blanked off with the help of Blind Flanges. This is practiced because of two reasons – i.e. for pressure tests in a plant, or simply since the customer may not want all the nozzles that were supplied on the tank. Typically, the best practice would be to use a standard gasket for these Tapped Blind Flange. Blind Flange ASME B16.5 Class 600, similar to standard pipe flanges, can be either raised face (RF) or flat-faced (FF). We offer these products at made-to-order sizes and shapes to our respected customers.

If the Paddle Blind Flanges is raised face, many Blind Flange Manufacturers in India, would recommend using a standard ring gasket that is appropriate for the service and/or test. Whereas if the Blind Flange Jis 10k is Flat-faced, manufacturers would usually recommend that the buyer use a full-face gasket. This is due to the fact that the most common reason the Blind Flange ASME B16.5 Class 150 is flat-faced. Hence, it is not designed to handle the bending forces that are a result of using a ring gasket or a raised face flange as compared to a flat-faced flange.

A Raised Face Blind Flange In Pn16 can be used to stop the flow in a pipeline. This is done with the help of a solid disk since there is no opening controlled in blind flanges, which allows the fluid to pass through. Instead, one placed the Blind Flanges between open flanges creates a block, which effectively causes the flow of a liquid to stop through the pipeline. These blind flanges typically have holes that are machined in order to match those of what might be a connecting valve or a flange that could be in that place. we are leading Blind Flange Suppliers In India.

What is BLRF flange?

These flat face BLRF Flange are used to blank off pipelines, valves, and pumps, it can also be used as an inspection cover. A blind flange is used to close ends of piping systems. These BLRF Flanges is available in various size, grades, Specification & thickness as per the client's requirements.

What is blind flanges?

A blind flanges is a solid flange as shown below. The purpose of these is to block off a section of pipe or a nozzle on a vessel that is not used. (A nozzle is typically a pipe coming out of a vessel and is usually flanged so it can be connected to valves or piping).
Many times a nozzle will be blanked off with a blind flange for pressure tests in a plant, or simply because the customer does not need all the nozzles that were supplied on the tank.

ASME B16.5 Blind Flanges Specification :

Standard : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

Size : 1/2" (15 NB) to 48" (1200NB)

Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.

Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

BS : BS4504 , BS4504, BS1560, BS10

DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673

Lap Joint Flanges Specification

Specifications for Blind Flanges is mentioned below. If any of the specification is not mentioned here, please get in touch with us

Material of Construction Standard Grades
Stainless Steel Blind Flanges ASTM A182 , A240 F 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H,317, 317L, 321, 321H, 347, 347H, 201, 202, 904L
Carbon Steel Blind Flanges ASTM A105 Gr. F42,46,52,56,60,65,70
Alloy Steel
Blind Flanges
ASTM A182 F1,F5,F9,F11,F22,F91
Nickel Alloy
Blind Flanges
ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020),
Copper Alloys Blind Flanges ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200,
Low Temperature Carbon Steel Blind Flanges ASTM A350 LF2 , LF3
Duplex Steel Blind Flanges ASTM A182, A240 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61

Dimension Chart of Blind Flanges

Dimenion Chart for Blind Flanges is mentioned below. If any of the Dimension is not mentioned here, please get in touch with us

Outside Diameter
≤ 24 = 1.6 mm | > 24 = ± 3.2 mm
Inside Diameter
≤ 10 = ± 0.8 mm | ≥ 12 = + 1.6 mm / – 0 mm
Diameter of Contact Face
1.6 mm Raised Face = ± 0.8 mm
6.35 mm Raised Face, Tongue & Groove / Male-Female = ± 0.4 mm
Outside Diameter of Hub
≤ 12 = + 2.4 mm / – 1.6 mm | ≥ 14 = ± 3.2 mm
Diameter of Counterbore
Same as for Inside Diameter
Bolt Circle = 1.6 mm | Bolt Hole Spacing = ± 0.8 mm
Eccentricity of Bolt Circle with Respect to Facing
≤ 2½ = 0.8 mm max. | ≥ 3 = 1.6 mm max.
≤ 18 = + 3.2 mm / – 0 | ≥ 20 = + 4.8 mm / – 0
Length thru Hub
≤ 18 = + 3.2 mm / – 0.8 mm | ≥ 20 = + 4.8 mm / – 1.6 mm

All Classes Dimensions of Blind Flanges

Blind flange
NPS 1/2
CLass 150 300 600 900 1500 2500
90 95 95 120 120 135
B 9.6 12.7 14.3 22.3 22.3 30.2
11.2 14.3 20.7 28.7 28.7 36.6
35.1 35.1 35.1 35.1 35.1 35.1
60.3 66.7 66.7 82.6 82.6 88.9
4 4 4 4 4 4
15.9 15.9 15.9 22.2 22.2 22.2
Stud Bolts Diameter x Length
1/2 1/2 1/2 3/4 3/4 3/4
55 65 75 110 110 120
Other Diameters
NPS 3/4 1 2
3 4 6 8 10 12
14 16 18 20 24    

  • Dimensions are in millimeters unless otherwise indicated.
  • The length of the Stud Bolt does not include the height of the chamfers (points).

  • Call@ 9987994248. Find here India's top Blind Flanges supplier and as well as Manufacturer & exporter of ASME/ANSI B16.5 Blind Flanges & BLRF Flanges Class 150 for industrial purposes in Mumbai, Pune, Chennai, Ahmedabad.

    Other Names: ANSI B16.5 Blind Flanges, BLRF Flanges, Blind Flange Class 150, BLRF Flange Class 150

    Material: Stainless Steel, Carbon Steel, Duplex & Super Duplex Steel, High Nickel Alloy, Hastelloy & Titanium

    Brand: Fitwel Industries LLP

    Manufacturer: Fitwel Industries LLP

    Suppliers & Exporter: Fitwel Industries LLP

    Rating: 4.2/5 based on 1045 customer reviews

    Other Related Products:

    We Supply Blind Flanges For Various Application Industry Like :

    Oil & Gas Industries

    Oil & Gas Industries

    Petrochemical Industries

    Petrochemical Industries

    Engineering Industries

    Engineering Industries

    Chemical Industries

    Chemical Industries

    Sugar Industries

    Sugar Industries

    Power Generation Industries

    Power Generation Industries

    Fertilizers Industries

    Fertilizers Industries

    Food Processing Industries

    Food Processing Industries