One of The Oldest manufacturers, suppliers and exporter of Stainless Steel Fittings and Flanges, Alloy Steel Fittings and Flanges, Carbon Steel Fittings and Flanges Since 1987.

Groove and Tongue Flanges Manufacturers in India

Request a Call Back


Small Tongue And Groove Flanges manufacturers in India


Fitwel Industries LLP is a leading independent manufacture, supplier and exporter in Mumbai India. We have extensive experience in supplying small tongue and groove flanges in all standard in which the common world standards include ASAI/ ANSI/ ASME, BS10, PN/ DIN and JIS/ KS Flanges are stocked or available in the following range of sizes and materials for the petrochemical, oil, gas and allied industries. Tongue and Groove Flange can be forged or plate be assembled and disassembled easily with Pipes. In the Tongue & Groove Flange Asme B16.5 Class 300, both the Tongue face as well as the Groove faces of must be matched to each other.

One of the flange faces has been produced with a raised ring also referred to as Tongue, machined onto the flange face by the Tongue & Groove Flange Manufacturer in India. Tongue & Groove Flange Jis 16k facings have been standardized in both large and small types. The Tongue & Groove Flange Din En 1092-1 are different from male and female flanges in terms of the inside diameters. To elaborate, the inside diameters of the Tongue & Groove Flange Awwa C207 Class D do not extend into the flange base, thus the gasket has been retained on its inner and outer diameter. The Tongue & Groove Flange Jis 5k are commonly found on pump covers and Valve Bonnets.

Tongue & Groove Flange Asme B16.5 joints also have an added advantage i.e. they are self-aligning and have a tendancy to act as a reservoir for the adhesive. The scarf joint in the Tongue & Groove Flange Jis 10k keeps the axis of loading in line or aligned with the joint. Hence, the Tongue & Groove Flange Class 600 does not require any major machining operation.

Built to align with the Tongue and Groove ears, one side of these Tongue groove flanges has a raised ring, which is referred to as a Tongue that is machined onto the face of the flange whereas the mating flange will have a corresponding depression or known as a Groove machined in its nose. Both large as well as small kinds of tongue and groove facings are standardized, which in turn vary from male and female type of flange in terms of the internal diameter of the tongue and groove ones. The internal diameters of the tongue and groove facing do not reach into the base of the flange, thus the gasket is held on its inner and outer diameter. Commonly a Carbon steel grooved flange is found on Valve Bonnets or on pump coverings. A benefit of having ANSI B16.5 Tongue and groove flange connections is that they tend to be self-aligned, thus, serving as an elastic buffer. The scarf joint of this kind of Stainless steel grooved flange is what holds the loading point in line with the joint, which is why it does not require an intensive machining process. Specific flange faces such as the RTJ, Tongue and Groove, and Female and Male are not to be bolted. This is because the touch surfaces do not overlap along with the absence of a gasket which has one type on one hand and another type on the other. Typically these flanges are recommended to be used in a low pressured, yet non-critical applications, in order to attach other Groove and Tongue components such as the Groove flange adapter. Groove and Tongue flanges are used to connect other Groove and Tongue components in low pressure, non-critical applications.

What is a Flange face?

Different types of flange faces are used as the contact surfaces to seat the sealing gasket material. ASME B16.5 and B16.47 define various types of flange facings, including the raised face, the large male and female facings which have identical dimensions to provide a relatively large contact area.

Other flange facings covered by these standards include the large and small tongue-and-groove facings, and the ring joint facing specifically for ring joint type metal gaskets.


Raised Face (RF)

The Raised Face flange is the most common type used in process plant applications, and is easily to identify. It is referred to as a raised face because the gasket surfaces are raised above the bolting circle face. This face type allows the use of a wide combination of gasket designs, including flat ring sheet types and metallic composites such as spiral wound and double jacketed types.

The purpose of a RF flange is to concentrate more pressure on a smaller gasket area and thereby increase the pressure containment capability of the joint. Diameter and height are in ASME B16.5 defined, by pressure class and diameter. Pressure rating of the flange determines the height of the raised face.

The typical flange face finish for ASME B16.5 RF flanges is 125 to 250 µin Ra (3 to 6 µm Ra).

Raised Face flange

Raised Face height

For the height measures H and B of all described dimensions of flanges on this website, with exception of the Lap Joint flange, it is important to understand and remember the following:

In pressure classes 150 and 300, the height of raised face is approximately 1.6 mm (1/16 inch). In these two pressure classes, almost all suppliers of flanges, show in their catalog or brochure, the H and B dimensions including the raised face height. ((Fig. 1))

Slip On Flanges

In pressure classes 400, 600, 900, 1500 and 2500, the height of raised face is approximately 6.4 mm (1/4 inch). In these pressure classes, most suppliers show the H and B dimensions excluding the raised face height. (Fig. 2)


Flat Face (FF)

The Flat Face flange has a gasket surface in the same plane as the bolting circle face. Applications using flat face flanges are frequently those in which the mating flange or flanged fitting is made from a casting.

Flat face flanges are never to be bolted to a raised face flange. ASME B31.1 says that when connecting flat face cast iron flanges to carbon steel flanges, the raised face on the carbon steel flange must be removed, and that a full face gasket is required. This is to keep the thin, bittle cast iron flange from being sprung into the gap caused by the raised face of the carbon steel flange.

Slip On Flanges

Ring-Type Joint (RTJ)

The Ring Type Joint flanges are typically used in high pressure (Class 600 and higher rating) and/or high temperature services above 800°F (427°C). They have grooves cut into their faces which steel ring gaskets. The flanges seal when tightened bolts compress the gasket between the flanges into the grooves, deforming (or Coining) the gasket to make intimate contact inside the grooves, creating a metal to metal seal.

An RTJ flange may have a raised face with a ring groove machined into it. This raised face does not serve as any part of the sealing means. For RTJ flanges that seal with ring gaskets, the raised faces of the connected and tightened flanges may contact each other. In this case the compressed gasket will not bear additional load beyond the bolt tension, vibration and movement cannot further crush the gasket and lessen the connecting tension.


Slip On Flanges

Ring Type Joint gaskets

Ring Type Joint gaskets are metallic sealing rings, suitable for high-pressure and high-temperature applications. They are always applied to special, accompanying flanges which ensure good, reliable sealing with the correct choice of profiles and material.

Ring Type Joint gaskets are designed to seal by "initial line contact" or wedging action between the mating flange and the gasket. By applying pressure on the seal interface through bolt force, the "softer" metal of the gasket flows into the microfine structure of the harder flange material, and creating a very tight and efficient seal.


Slip On Flanges

Most applied type is style R ring that is manufactured in accordance with ASME B16.20 used with ASME B16.5 flanges, class 150 to 2500. Style 'R' ring type joints are manufactured in both oval and octagonal configurations.

The Octagonal ring has a higher sealing efficiency than the oval and would be the preferred gasket. However, only the oval cross section can be used in the old type round bottom groove. The newer flat bottom groove design will accept either the oval or the octagonal cross section.

Style R ring type joints are designed to seal pressure up to 6,250 psi in accordance with ASME B16.5 pressure ratings and up to 5,000 psi.

The RX type is suitable for pressures up to 700 bar. This RTJ is capable of sealing itself. The outer sealing surfaces make the first contact with the flanges. A higher system pressure causes a higher surface pressure. Type RX is interchangeable with the standard R-models.

The BX type is suitable for very high pressures up to 1500 bar. This ring joint is not interchangeable with other types, and is only suited for API type BX flanges and grooves.

The sealing surfaces on the ring joint grooves must be smoothly finished to 63 Microinches and be free of objectionable ridges, tool or chatter marks. They seal by an initial line contact or a wedging action as the compressive forces are applied. The hardness of the ring should always be less than the hardness of the flanges.


Choice of Material

The table below indicates the most commonly used materials for ring type joints.

  • Soft iron
  • Carbon steel
  • SS (Stainless steel)
  • Nickel alloys
  • Duplex steel
  • Aluminum
  • Titanium
  • Copper
  • Monel
  • Hastelloy
  • Inconel
  • Incoloy

Tongue and Groove (T&G)

The Tongue and Groove faces of this flanges must be matched. One flange face has a raised ring (Tongue) machined onto the flange face while the mating flange has a matching depression (Groove) machined into it's face.

Tongue-and-groove facings are standardized in both large and small types. They differ from male-and-female in that the inside diameters of the tongue-and-groove do not extend into the flange base, thus retaining the gasket on its inner and outer diameter. These are commonly found on pump covers and Valve Bonnets.

Tongue-and-groove joints also have an advantage in that they are self-aligning and act as a reservoir for the adhesive. The scarf joint keeps the axis of loading in line with the joint and does not require a major machining operation.

General flange faces such as the RTJ, TandG and the FandM shall never be bolted together. The reason for this is that the contact surfaces do not match and there is no gasket that has one type on one side and another type on the other side.


Slip On Flanges

Male-and-Female (M&F)

With this type the flanges also must be matched. One flange face has an area that extends beyond the normal flange face (Male). The other flange or mating flange has a matching depression (Female) machined into it's face.

The female face is 3/16-inch deep, the male face is1/4-inch high, and both are smooth finished. The outer diameter of the female face acts to locate and retain the gasket. In principle 2 versions are available; the Small M&F Flanges and the Large M&F Flanges. Custom male and female facings are commonly found on the Heat Exchanger shell to channel and cover flanges.

Large Male&Female Flanges
Slip On Flanges

Small Male&Female Flanges
Slip On Flanges

Advantages and Disadvantages of T&G and M&F flange faces

Advantages

Better sealing properties, more precise location and exact compression af sealing material, utilization of other, more suitable sealing and spezialized sealing material (O-rings).


Disadvantages

Commercial availabillity and cost. Normal raised faced is far more common and ready available both regarding Valves, flanges and sealing material. Another complexity is that some rigid rules must be applied to the piping design. Do you order Valves to be female end both sides, or on one side maybe, in which case do you point all male ends in the flow direction, or what. Same applies to any flanged joint / vessel connection of course.


Join or match an RTJ flange with a RF flange

  • Several times I have been asked: may I join or match an RTJ flange with a RF flange?. My answer of course: that is not allowed. Today April 29, 2012, the question was asked again. I will try to explain why a connection between an RF and RTJ flange is not acceptable.
  • RTJ flanges have grooves in their sealing faces, while RF flanges do not. If you want to make a connection between the two flanges, you can only apply a flat gasket. This flat gasket wil be make full contact with de sealing surface of the RF flange, but not with the sealing surface of the RTJ flange. Due to the groove in the flange RTJ a certain portion of the gasket is not utilized, and therefore it is not possible to make a properly sealed flange connection. Further, the RTJ flange will be damage the gasket, especially if a spiral wound or metal jacketed gasket is applied.
    My advice is: never make an RF-RTJ flange connection. Maybe do you have not direct a spill, but when an accident happens, the insurance experts know where they can find you.
    Consider injuries or fatalities, a wrong flange connection is't worth it.

  • ASME B16.5 Groove and Tongue Flanges Specification :

    Standard : ANSI B16.5, ANSI B16.47 Series A and B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

    Size : 1/2"NB TO 60"NB IN

    Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.

    Flange Face Type : Raised Face (RF), Ring Type Joint (RTJ),Large Tongue and Groove, Small Tongue and Groove

    BS : BS4504 , BS4504, BS1560, BS10

    DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673

    tongue and groove Flanges Specification

    Specifications for tongue and groove Flanges is mentioned below. If any of the specification is not mentioned here, please get in touch with us

    Material of Construction Standard Grades
    Stainless Steel tongue and groove Flanges ASTM A182 , A240 F 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H,317, 317L, 321, 321H, 347, 347H, 201, 202, 904L
    Carbon Steel tongue and groove Flanges ASTM A105 Gr. F42,46,52,56,60,65,70
    Alloy Steel
    tongue and groove Flanges
    ASTM A182 F1,F5,F9,F11,F22,F91
    Nickel Alloy
    tongue and groove Flanges
    ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020),
    Copper Alloys tongue and groove Flanges ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200,
    Low Temperature Carbon Steel tongue and groove Flanges ASTM A350 LF2 , LF3
    Duplex Steel tongue and groove Flanges ASTM A182, A240 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61

    Dimension Chart of tongue and groove Flanges

    Dimenion Chart for tongue and groove Flanges is mentioned below. If any of the Dimension is not mentioned here, please get in touch with us

    Outside Diameter
    ≤ 24 = 1.6 mm | > 24 = ± 3.2 mm
    Inside Diameter
    ≤ 10 = ± 0.8 mm | ≥ 12 = + 1.6 mm / – 0 mm
    Diameter of Contact Face
    1.6 mm Raised Face = ± 0.8 mm
    6.35 mm Raised Face, Tongue & Groove / Male-Female = ± 0.4 mm
    Outside Diameter of Hub
    ≤ 12 = + 2.4 mm / – 1.6 mm | ≥ 14 = ± 3.2 mm
    Diameter of Counterbore
    Same as for Inside Diameter
    Drilling
    Bolt Circle = 1.6 mm | Bolt Hole Spacing = ± 0.8 mm
    Eccentricity of Bolt Circle with Respect to Facing
    ≤ 2½ = 0.8 mm max. | ≥ 3 = 1.6 mm max.
    Thickness
    ≤ 18 = + 3.2 mm / – 0 | ≥ 20 = + 4.8 mm / – 0
    Length thru Hub
    ≤ 18 = + 3.2 mm / – 0.8 mm | ≥ 20 = + 4.8 mm / – 1.6 mm


    Call@ 9987994248. India's prominent Exporter, Manufacturer and Supplier of Premium Quality AISI/ ANSI / ASME B16.5 Small Tongue And Groove Flanges in Mumbai, Ahmedabad, Chennai, Pune, India & so on.

    Other Names: AISI/ ANSI/ ANSI B16.5 Tongue And Groove Flanges, Small Tongue And Groove Flanges Class 150, Small Tongue And Groove Flanges Class 300

    Material: Stainless Steel, Carbon Steel, Duplex & Super Duplex Steel, High Nickel Alloy, Hastelloy & Titanium

    Brand: Fitwel Industries LLP

    Manufacturer: Fitwel Industries LLP

    Suppliers & Exporter: Fitwel Industries LLP

    Rating: 4.2/5 based on 1051 customer reviews

    Other Related Products:

    We Supply Groove and Tongue Flanges For Various Application Industry Like :

    Oil and Gas Industries

    Petrochemical Industries

    Engineering Industries

    Chemical Industries

    Sugar Industries

    Power Generation Industries

    Fertilizers Industries

    Food Processing Industries



    Tongue and Grooved Flanges Manufacturer World Wide

    Below, We are having existence in countries below for Tongue and Grooved Flanges

    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Dubai, United Arab Emirates. Get the best offer for high-quality Tongue and Grooved Flanges from us in Dubai, UAE. We have plenty of stock of Tongue and Grooved Flanges in the UAE. Place your order online for Tongue and Grooved Flanges in Dubai, United Arab Emirates. We are the leading Tongue and Grooved Flanges manufacturer in Dubai, UAE. Get your best quality Tongue and Grooved Flanges in Dubai. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Singapore. Get the best offer for high-quality Tongue and Grooved Flanges from us in Singapore. We have plenty of stock of Tongue and Grooved Flanges in the Singapore. Place your order online for Tongue and Grooved Flanges in Singapore. We are the leading Tongue and Grooved Flanges manufacturer in Singapore. Get your best quality Tongue and Grooved Flanges in Singapore. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Oman. Get the best offer for high-quality Tongue and Grooved Flanges from us in Oman. We have plenty of stock of Tongue and Grooved Flanges in the Oman. Place your order online for Tongue and Grooved Flanges in Oman. We are the leading Tongue and Grooved Flanges manufacturer in Oman. Get your best quality Tongue and Grooved Flanges in Oman. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Italy. Get the best offer for high-quality Tongue and Grooved Flanges from us in Italy. We have plenty of stock of Tongue and Grooved Flanges in the Italy. Place your order online for Tongue and Grooved Flanges in Italy. We are the leading Tongue and Grooved Flanges manufacturer in Italy. Get your best quality Tongue and Grooved Flanges in Italy. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Qatar. Get the best offer for high-quality Tongue and Grooved Flanges from us in Qatar. We have plenty of stock of Tongue and Grooved Flanges in the Qatar. Place your order online for Tongue and Grooved Flanges in Qatar. We are the leading Tongue and Grooved Flanges manufacturer in Qatar. Get your best quality Tongue and Grooved Flanges in Qatar. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Australia. Get the best offer for high-quality Tongue and Grooved Flanges from us in Australia. We have plenty of stock of Tongue and Grooved Flanges in the Australia. Place your order online for Tongue and Grooved Flanges in Australia. We are the leading Tongue and Grooved Flanges manufacturer in Australia. Get your best quality Tongue and Grooved Flanges in Australia. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in New zealand. Get the best offer for high-quality Tongue and Grooved Flanges from us in New zealand. We have plenty of stock of Tongue and Grooved Flanges in the New zealand. Place your order online for Tongue and Grooved Flanges in New zealand. We are the leading Tongue and Grooved Flanges manufacturer in New zealand. Get your best quality Tongue and Grooved Flanges in New zealand. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Saudi Arabia. Get the best offer for high-quality Tongue and Grooved Flanges from us in Saudi Arabia. We have plenty of stock of Tongue and Grooved Flanges in the Saudi Arabia. Place your order online for Tongue and Grooved Flanges in Saudi Arabia. We are the leading Tongue and Grooved Flanges manufacturer in Saudi Arabia. Get your best quality Tongue and Grooved Flanges in Saudi Arabia. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Bahrain. Get the best offer for high-quality Tongue and Grooved Flanges from us in Bahrain. We have plenty of stock of Tongue and Grooved Flanges in the Bahrain. Place your order online for Tongue and Grooved Flanges in Bahrain. We are the leading Tongue and Grooved Flanges manufacturer in Bahrain. Get your best quality Tongue and Grooved Flanges in Bahrain. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in UK. Get the best offer for high-quality Tongue and Grooved Flanges from us in UK. We have plenty of stock of Tongue and Grooved Flanges in the UK. Place your order online for Tongue and Grooved Flanges in UK. We are the leading Tongue and Grooved Flanges manufacturer in UK. Get your best quality Tongue and Grooved Flanges in UK. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Austria. Get the best offer for high-quality Tongue and Grooved Flanges from us in Austria. We have plenty of stock of Tongue and Grooved Flanges in the Austria. Place your order online for Tongue and Grooved Flanges in Austria. We are the leading Tongue and Grooved Flanges manufacturer in Austria. Get your best quality Tongue and Grooved Flanges in Austria. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Nigeria. Get the best offer for high-quality Tongue and Grooved Flanges from us in Nigeria. We have plenty of stock of Tongue and Grooved Flanges in the Nigeria. Place your order online for Tongue and Grooved Flanges in Nigeria. We are the leading Tongue and Grooved Flanges manufacturer in Nigeria. Get your best quality Tongue and Grooved Flanges in Nigeria. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Sudan. Get the best offer for high-quality Tongue and Grooved Flanges from us in Sudan. We have plenty of stock of Tongue and Grooved Flanges in the Sudan. Place your order online for Tongue and Grooved Flanges in Sudan. We are the leading Tongue and Grooved Flanges manufacturer in Sudan. Get your best quality Tongue and Grooved Flanges in Sudan. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Egypt. Get the best offer for high-quality Tongue and Grooved Flanges from us in Egypt. We have plenty of stock of Tongue and Grooved Flanges in the Egypt. Place your order online for Tongue and Grooved Flanges in Egypt. We are the leading Tongue and Grooved Flanges manufacturer in Egypt. Get your best quality Tongue and Grooved Flanges in Egypt. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Zambia. Get the best offer for high-quality Tongue and Grooved Flanges from us in Zambia. We have plenty of stock of Tongue and Grooved Flanges in the Zambia. Place your order online for Tongue and Grooved Flanges in Zambia. We are the leading Tongue and Grooved Flanges manufacturer in Zambia. Get your best quality Tongue and Grooved Flanges in Zambia. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Libya. Get the best offer for high-quality Tongue and Grooved Flanges from us in Libya. We have plenty of stock of Tongue and Grooved Flanges in the Libya. Place your order online for Tongue and Grooved Flanges in Libya. We are the leading Tongue and Grooved Flanges manufacturer in Libya. Get your best quality Tongue and Grooved Flanges in Libya. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Brazil. Get the best offer for high-quality Tongue and Grooved Flanges from us in Brazil. We have plenty of stock of Tongue and Grooved Flanges in the Brazil. Place your order online for Tongue and Grooved Flanges in Brazil. We are the leading Tongue and Grooved Flanges manufacturer in Brazil. Get your best quality Tongue and Grooved Flanges in Brazil. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Chile. Get the best offer for high-quality Tongue and Grooved Flanges from us in Chile. We have plenty of stock of Tongue and Grooved Flanges in the Chile. Place your order online for Tongue and Grooved Flanges in Chile. We are the leading Tongue and Grooved Flanges manufacturer in Chile. Get your best quality Tongue and Grooved Flanges in Chile. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in USA. Get the best offer for high-quality Tongue and Grooved Flanges from us in USA. We have plenty of stock of Tongue and Grooved Flanges in the USA. Place your order online for Tongue and Grooved Flanges in USA. We are the leading Tongue and Grooved Flanges manufacturer in USA. Get your best quality Tongue and Grooved Flanges in USA. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Mexico. Get the best offer for high-quality Tongue and Grooved Flanges from us in Mexico. We have plenty of stock of Tongue and Grooved Flanges in the Mexico. Place your order online for Tongue and Grooved Flanges in Mexico. We are the leading Tongue and Grooved Flanges manufacturer in Mexico. Get your best quality Tongue and Grooved Flanges in Mexico. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Denmark. Get the best offer for high-quality Tongue and Grooved Flanges from us in Denmark. We have plenty of stock of Tongue and Grooved Flanges in the Denmark. Place your order online for Tongue and Grooved Flanges in Denmark. We are the leading Tongue and Grooved Flanges manufacturer in Denmark. Get your best quality Tongue and Grooved Flanges in Denmark. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Ukraine. Get the best offer for high-quality Tongue and Grooved Flanges from us in Ukraine. We have plenty of stock of Tongue and Grooved Flanges in the Ukraine. Place your order online for Tongue and Grooved Flanges in Ukraine. We are the leading Tongue and Grooved Flanges manufacturer in Ukraine. Get your best quality Tongue and Grooved Flanges in Ukraine. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Peru. Get the best offer for high-quality Tongue and Grooved Flanges from us in Peru. We have plenty of stock of Tongue and Grooved Flanges in the Peru. Place your order online for Tongue and Grooved Flanges in Peru. We are the leading Tongue and Grooved Flanges manufacturer in Peru. Get your best quality Tongue and Grooved Flanges in Peru. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Lebanon. Get the best offer for high-quality Tongue and Grooved Flanges from us in Lebanon. We have plenty of stock of Tongue and Grooved Flanges in the Lebanon. Place your order online for Tongue and Grooved Flanges in Lebanon. We are the leading Tongue and Grooved Flanges manufacturer in Lebanon. Get your best quality Tongue and Grooved Flanges in Lebanon. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Lebanon. Get the best offer for high-quality Tongue and Grooved Flanges from us in Lebanon. We have plenty of stock of Tongue and Grooved Flanges in the Lebanon. Place your order online for Tongue and Grooved Flanges in Lebanon. We are the leading Tongue and Grooved Flanges manufacturer in Lebanon. Get your best quality Tongue and Grooved Flanges in Lebanon. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in France. Get the best offer for high-quality Tongue and Grooved Flanges from us in France. We have plenty of stock of Tongue and Grooved Flanges in the France. Place your order online for Tongue and Grooved Flanges in France. We are the leading Tongue and Grooved Flanges manufacturer in France. Get your best quality Tongue and Grooved Flanges in France. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Hungary. Get the best offer for high-quality Tongue and Grooved Flanges from us in Hungary. We have plenty of stock of Tongue and Grooved Flanges in the Hungary. Place your order online for Tongue and Grooved Flanges in Hungary. We are the leading Tongue and Grooved Flanges manufacturer in Hungary. Get your best quality Tongue and Grooved Flanges in Hungary. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Ethiopia. Get the best offer for high-quality Tongue and Grooved Flanges from us in Ethiopia. We have plenty of stock of Tongue and Grooved Flanges in the Ethiopia. Place your order online for Tongue and Grooved Flanges in Ethiopia. We are the leading Tongue and Grooved Flanges manufacturer in Ethiopia. Get your best quality Tongue and Grooved Flanges in Ethiopia. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Uganda. Get the best offer for high-quality Tongue and Grooved Flanges from us in Uganda. We have plenty of stock of Tongue and Grooved Flanges in the Uganda. Place your order online for Tongue and Grooved Flanges in Uganda. We are the leading Tongue and Grooved Flanges manufacturer in Uganda. Get your best quality Tongue and Grooved Flanges in Uganda. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Uganda. Get the best offer for high-quality Tongue and Grooved Flanges from us in Uganda. We have plenty of stock of Tongue and Grooved Flanges in the Uganda. Place your order online for Tongue and Grooved Flanges in Uganda. We are the leading Tongue and Grooved Flanges manufacturer in Uganda. Get your best quality Tongue and Grooved Flanges in Uganda. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Argentina. Get the best offer for high-quality Tongue and Grooved Flanges from us in Argentina. We have plenty of stock of Tongue and Grooved Flanges in the Argentina. Place your order online for Tongue and Grooved Flanges in Argentina. We are the leading Tongue and Grooved Flanges manufacturer in Argentina. Get your best quality Tongue and Grooved Flanges in Argentina. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Ecuador. Get the best offer for high-quality Tongue and Grooved Flanges from us in Ecuador. We have plenty of stock of Tongue and Grooved Flanges in the Ecuador. Place your order online for Tongue and Grooved Flanges in Ecuador. We are the leading Tongue and Grooved Flanges manufacturer in Ecuador. Get your best quality Tongue and Grooved Flanges in Ecuador. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Uruguay. Get the best offer for high-quality Tongue and Grooved Flanges from us in Uruguay. We have plenty of stock of Tongue and Grooved Flanges in the Uruguay. Place your order online for Tongue and Grooved Flanges in Uruguay. We are the leading Tongue and Grooved Flanges manufacturer in Uruguay. Get your best quality Tongue and Grooved Flanges in Uruguay. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Indonesia. Get the best offer for high-quality Tongue and Grooved Flanges from us in Indonesia. We have plenty of stock of Tongue and Grooved Flanges in the Indonesia. Place your order online for Tongue and Grooved Flanges in Indonesia. We are the leading Tongue and Grooved Flanges manufacturer in Indonesia. Get your best quality Tongue and Grooved Flanges in Indonesia. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in SriLanka. Get the best offer for high-quality Tongue and Grooved Flanges from us in SriLanka. We have plenty of stock of Tongue and Grooved Flanges in the SriLanka. Place your order online for Tongue and Grooved Flanges in SriLanka. We are the leading Tongue and Grooved Flanges manufacturer in SriLanka. Get your best quality Tongue and Grooved Flanges in SriLanka. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Vietnam. Get the best offer for high-quality Tongue and Grooved Flanges from us in Vietnam. We have plenty of stock of Tongue and Grooved Flanges in the Vietnam. Place your order online for Tongue and Grooved Flanges in Vietnam. We are the leading Tongue and Grooved Flanges manufacturer in Vietnam. Get your best quality Tongue and Grooved Flanges in Vietnam. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Kuwait. Get the best offer for high-quality Tongue and Grooved Flanges from us in Kuwait. We have plenty of stock of Tongue and Grooved Flanges in the Kuwait. Place your order online for Tongue and Grooved Flanges in Kuwait. We are the leading Tongue and Grooved Flanges manufacturer in Kuwait. Get your best quality Tongue and Grooved Flanges in Kuwait. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Jordan. Get the best offer for high-quality Tongue and Grooved Flanges from us in Jordan. We have plenty of stock of Tongue and Grooved Flanges in the Jordan. Place your order online for Tongue and Grooved Flanges in Jordan. We are the leading Tongue and Grooved Flanges manufacturer in Jordan. Get your best quality Tongue and Grooved Flanges in Jordan. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Netherlands. Get the best offer for high-quality Tongue and Grooved Flanges from us in Netherlands. We have plenty of stock of Tongue and Grooved Flanges in the Netherlands. Place your order online for Tongue and Grooved Flanges in Netherlands. We are the leading Tongue and Grooved Flanges manufacturer in Netherlands. Get your best quality Tongue and Grooved Flanges in Netherlands. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Greeces. Get the best offer for high-quality Tongue and Grooved Flanges from us in Greeces. We have plenty of stock of Tongue and Grooved Flanges in the Greeces. Place your order online for Tongue and Grooved Flanges in Greeces. We are the leading Tongue and Grooved Flanges manufacturer in Greeces. Get your best quality Tongue and Grooved Flanges in Greeces. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Belgiums. Get the best offer for high-quality Tongue and Grooved Flanges from us in Belgiums. We have plenty of stock of Tongue and Grooved Flanges in the Belgiums. Place your order online for Tongue and Grooved Flanges in Belgiums. We are the leading Tongue and Grooved Flanges manufacturer in Belgiums. Get your best quality Tongue and Grooved Flanges in Belgiums. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Algerias. Get the best offer for high-quality Tongue and Grooved Flanges from us in Algerias. We have plenty of stock of Tongue and Grooved Flanges in the Algerias. Place your order online for Tongue and Grooved Flanges in Algerias. We are the leading Tongue and Grooved Flanges manufacturer in Algerias. Get your best quality Tongue and Grooved Flanges in Algerias. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Cubas. Get the best offer for high-quality Tongue and Grooved Flanges from us in Cubas. We have plenty of stock of Tongue and Grooved Flanges in the Cubas. Place your order online for Tongue and Grooved Flanges in Cubas. We are the leading Tongue and Grooved Flanges manufacturer in Cubas. Get your best quality Tongue and Grooved Flanges in Cubas. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Angolas. Get the best offer for high-quality Tongue and Grooved Flanges from us in Angolas. We have plenty of stock of Tongue and Grooved Flanges in the Angolas. Place your order online for Tongue and Grooved Flanges in Angolas. We are the leading Tongue and Grooved Flanges manufacturer in Angolas. Get your best quality Tongue and Grooved Flanges in Angolas. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Canada. Get the best offer for high-quality Tongue and Grooved Flanges from us in Canada. We have plenty of stock of Tongue and Grooved Flanges in the Canada. Place your order online for Tongue and Grooved Flanges in Canada. We are the leading Tongue and Grooved Flanges manufacturer in Canada. Get your best quality Tongue and Grooved Flanges in Canada. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.
    • We are the leading manufacturer and supplier of Tongue and Grooved Flanges in Namibia. Get the best offer for high-quality Tongue and Grooved Flanges from us in Namibia. We have plenty of stock of Tongue and Grooved Flanges in the Namibia. Place your order online for Tongue and Grooved Flanges in Namibia. We are the leading Tongue and Grooved Flanges manufacturer in Namibia. Get your best quality Tongue and Grooved Flanges in Namibia. Our Tongue and Grooved Flanges are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards.

    Countries & Cities We Served


    FREQUENTLY SEARCH AS:

    Groove and Tongue Flanges| ANSI B16.5 Groove and Tongue Flanges| SWRF Flanges Class 150| Groove and Tongue Flanges Manufacturers| Groove and Tongue Flanges Manufacturers in India| Groove and Tongue Flanges Suppliers India| Groove and Tongue Flanges Suppliers Dubai| Groove and Tongue Flanges Suppliers Mumbai| Groove and Tongue Flanges Exporter India ASME B16.47 SWRF Flanges| ASME Flanges| ANSI Groove and Tongue Flanges| BS-4504 Groove and Tongue Flanges| DIN-2527 Groove and Tongue Flanges| Standard MSS-SP-44 Groove and Tongue Flanges| Class 150 LBS Groove and Tongue Flanges| Groove and Tongue Flanges Supplier in India